Figure 94: Enable Sla Mode For Analog Trunk; Figure 95: Analog Trunk With Sla Mode Enabled; Figure 96: Sla Example - Sla Station - Grandstream Networks UCM6102 User Manual

Click on "Save". The analog trunk will be listed with trunk mode "SLA".
2. On the UCM6100, go to web UI->Basic/Call Routes->SLA Station page, click on "Create New SLA
Station". Please refer to section
can create one or more SLA stations to monitor the analog trunk. The following figure shows two
stations, 1002 and 1005, are configured to be associated with SLA trunk "fxo1".
Firmware Version 1.0.9.26

Figure 94: Enable SLA Mode for Analog Trunk

Figure 95: Analog Trunk with SLA Mode Enabled

[CREATE/EDIT SLA STATION]

Figure 96: SLA Example - SLA Station

UCM6100 Series IP PBX User Manual
for the configuration parameters. Users
Page 169 of 305