Batch Add Extensions; Batch Add Sip Extensions; Table 45: Fxs Extension Configuration Parameters - Specific Time - Grandstream Networks UCM6102 User Manual

1ghz arm cortex a8 application processor, 512mb ddr ram, 4gb nand flash
Hide thumbs Also See for UCM6102:
Table of Contents

Advertisement

Other Settings
Ring Timeout
Auto Record
Skip Trunk Auth
Time Condition for Skip Trunk
Auth
Dial Trunk Password
Specific Time
Time Condition

BATCH ADD EXTENSIONS

BATCH ADD SIP EXTENSIONS

In order to add multiple SIP extensions, BATCH add can be used to create standardized SIP extension
accounts. However, unique extension user name can't be set using BATCH add.
Under Web GUI->PBX->Basic/Call Routes->Extensions, click on "Batch Add Extensions"->"Batch Add
SIP Extensions".
Firmware Version 1.0.9.26
Configure the number of seconds to ring the user before the call is
forwarded to voicemail (voicemail is enabled) or hang up (voicemail is
disabled). If not specified, the default ring timeout is 60 seconds on the
UCM6100, which can be configured in the global ring timeout setting
under web GUI->Internal Options->IVR Prompt: General Preference. The
valid range is between 5 seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout
used is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The default
setting is disabled. The recording files can be accessed under web
GUI->CDR->Recording Files.
If set to "Yes", users can skip entering the password when making
outbound calls.
If set to "By Time", users can skip entering the password when
making outbound calls during the selected time condition.
If set to "No", users will be asked to enter the password when making
outbound calls.
If "Skip Trunk Auth" is set to "By Time", select a time condition during
which users can skip entering password when making outbound calls.
Configure personal password when making outbound calls via trunk.

Table 45: FXS Extension Configuration Parameters - Specific Time

Click to add Time Condition to configure specific time for this extension.
UCM6100 Series IP PBX User Manual
Page 136 of 305

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ucm6104Ucm6108Ucm6116

Table of Contents