Figure 150: Announcements Center Code Configuration; Figure 151: Announcements Center Example - Grandstream Networks UCM6102 User Manual

5. Click to create a new Announcement Center.
6. Give a name to the newly created Announcement Center.
7. Specify the code which will be used with group number to send the voice message to.
8. Select the message that will be used by the code from the Custom Prompt drop down menu. To create
a new Prompt, please click "Prompt" link and follow the instructions in that page.

Figure 150: Announcements Center Code Configuration

Code and Group number are used together to direct specified message to the target group. All extensions
in the group will receive the message. For example, we can send code 55 to group 666 by dialing 55666
from any extension registered to the UCM6100. All the members in group 666 which are extension 1000,
1001 and 1002 will receive this voice message after they pick up the call.

Figure 151: Announcements Center Example

Firmware Version 1.0.9.26 UCM6100 Series IP PBX User Manual Page 268 of 305