Overview Of Call Forwarding Types; Call Forwarding Key; Editing Call Forwarding Instructions - Unify OpenStage 60 T User Manual

Call forwarding
Edit call forwarding
Variable: All calls

Overview of call forwarding types

Different input masks are displayed depending on how you program call for-
warding (call forwarding key
The entries in the relevant menus correspond as explained in the following table:

Call forwarding key

Variable: All calls
All calls are forwarded, the saved number is deleted after shutdown.
Variable: External calls
Only external calls are forwarded.
Variable: Internal calls
Only internal calls are forwarded.
Call forwarding key
r
The call forwarding key offers a quick way to activate/deactivate call forwarding
instructions

these instructions

Editing call forwarding instructions

Press the call forwarding key to open the "Forwarding" page. It provides an over-
view of all call forwarding types
You can select a call forwarding type here and set station numbers as forwarding
destinations.
r
Press the key quickly. The LED lights up.
Select and confirm the option shown.
The "Forwarding" page opens.
Select a call forwarding type
i
Confirm the option shown to enter a forwarding destination directly
or
g
Enter the station number via a context menu
The forwarding destination is automatically deleted when call forwarding is de-
activated page 68.

All changes made here take effect immediately after a short timeout.
page 65 or Program/Service menu

page 68 and open the "Forwarding" page where you can edit
page 65.

page 65.

page 65


Program/Service menu
1=all calls
2=external calls only
3=internal calls only
page 66.

65
page 68).
page 66.
