Ending A Call; Activating Or Deactivating The Keypad Lock; After Leaving The Radio Network - Unify OpenStage M3 Plus User Manual

Conducting calls – the basic functions 25
Rejecting a call
If you do not wish to be disturbed, you can reject the call.
Confirm the message displayed with one of the two display keys. The call is re-
Reject call
jected and the caller hears the busy tone. The caller is then connected to the
mailbox (if configured).
Rejected calls are logged in the missed calls caller list Page 44.


Ending a call

a or
k
Press the On-hook key briefly or place the handset in the charging shell.
The call charges are displayed, depending on the communications system.

Activating or deactivating the keypad lock

This feature protects against accidentally pressing buttons when the handset is
in a pocket, for example. The keypad lock turns off automatically when a call
comes in and turns back on when the call has ended.
#
Press the hash key until the activation or deactivation is confirmed by a signal.
A key icon on the display indicates that the keypad lock is active.

After leaving the radio network

The message "No base" flashes on the display. The handset repeatedly at-
tempts to synchronise with a base. The intervals between synchronisation at-
tempts increase on account of the integrated power saving function.
You can switch off your handset to save the battery.