Dialling; Manual Redial - Unify OpenStage M3 Plus User Manual

Conducting calls – the basic functions
o
and possibly
possibly #
c or d
Call rejected
Please replace
handset.
if nec.
c or d
s t
Display Number
c or d
Language
If your preferred language for the display texts is not set, you can set this your-
self Page 16.


Dialling

Dialling preparation
X
Enter the required phone number and correct individual characters as neces-
sary using the "Delete" display key.
Insert a dial pause. A "P" appears between the digits entered. You may have to
insert a pause, for example, between the prefix and the phone number or when
checking a mailbox.
The dialling preparation function is also available with number redial and
when dialling from the handset's phonebook (
Dialling
Press the Talk or Speakerphone key. The user is called.
Either:
p
The user answers. You are conducting the call.
Or:
The user is busy or rejects the call. You are connected to the mailbox (if config-
ured).
a
Press the On-hook key to end the operation.

Manual redial

The last 20 phone numbers dialled are saved in the redial list. A phone number
that was dialled several times is only saved once.
c
When the handset is in idle status: Press the Talk or Speakerphone key briefly.
The redial list is displayed.
s t
Select the required telephone number.
If you want to see details of the selected phone number: Press the display key.
Show
Either:
Press the Talk or Speakerphone key briefly. The connection is set up.
Or:
Open the redial menu. The menu contains the following functions
Options
• Copy to Directory
• Automatic Redial
• Display Number
• Delete Entry
• Delete all
[
Select the menu item and confirm.
o
Change or complete the phone number, for example, with DDIA.
Press the Talk or Speakerphone key briefly. The connection is set up.
Ó
).
Page 29:

23