Advertisement
Placing a Call
1. Lift handset and dial the number you wish to call on the keypad.
NOTE: By default, there is a 6-second delay after dialing before the call is placed. This feature provides
the opportunity to double check your dialing and gives the option of backspacing to correct the
number if misdialed. The delay can be bypassed by pressing OK after dialing the last digit of the
phone number.
NOTE: All telephones allow immediate dialing without lifting receiver. Dialing automatically activates
the SPEAKER option. To move the call from speaker to handset, lift the handset.
Answering a Call
1. While the telephone is ringing:
a. Lift the Handset
b. Press the flashing Speaker button (Speaker LED will illuminate SOLID once answered).
c. Press the flashing Headset button (Headset LED will illuminate SOLID once answered).
Answering a Second Call (if call waiting is enabled)
1. If the phone is on a call already and a second call comes in, the phone will display the new caller's
name and number along with the question Accept?
2. Press OK to accept the second call. The first call will be placed on hold.
3. While Once you are on the second call, you have several options, each of which are accessible using
the up or down buttons on the Navigation bar and pressing OK. The Options are:
Disconnect & Return
•
Hold
•
Blind Transfer
•
Placing a Call on Hold
1. Within an active call, press the Hold button on the phone.
2. To pick up the call again, pick up the handset and press the button again.
Transfer a Call
There are two ways to transfer an active call:
Warm Transfer:
With an active call, press the Transfer
Using the keypad dial the number you wish to
transfer the caller to, announce the call to the
recipient and press the transfer button again. The
display returns to idle following successful transfer.
Conference Calling
1. Make or answer your first call.
2. Within the active call, press the conference button.
3. Dial the third person you wish to add to the conference.
4. Press the conference button to connect to the second and third parties.
5. Repeat for additional parties.
Blind Transfer:
button.
With an active call, press the transfer button, select
and confirm Blind Transfer Call? on the display.
Using the keypad dial the number you wish to
transfer the caller to and press OK or wait until the
autodial delay expires (6 second delay). The display
returns to idle following successful transfer.
Conference
•
Complete xfer
•
Retrieve held call
•
Advertisement
