T656 Operator panel cover latch assembly removal
1
Lift the operator panel cover assembly.
2
Remove the ten screws (A) securing the operator panel cover latch assembly to the operator panel cover
assembly.
3
Remove the operator panel cover latch assembly.
Sensor shield assembly removal
1
Remove the inner deflector. Go to
2
Gently unsnap the sensor shield assembly from the machine.
3
Remove the sensor shield assembly.
Installation warning: When replacing the sensor shield assembly, ensure that the spring (A) is properly
aligned and the sensor shield assembly opens and closes properly.
"Inner deflector removal" on page
A
Repair information
313
299.
4062