5062
200.43, 200.48—Paper Jam error service check
Step
Questions / actions
1
Remove the input tray.
Are the pick tires worn?
2
Open the left access door. Check the narrow
media sensor flag (C) for damage.
Is the narrow media sensor flag damaged?
3
Is the staging deflector assembly
damaged?
4
Turn the printer off, and open the system
board shield. Check the cable in connector
JPP2 for proper connection to the system
board.
Is the cable properly connected?
2-88
Service Manual
Yes
Replace the pick tires. See
"Pick rolls removal" on
page
4-118.
Replace the narrow media
sensor flag. See
"Sensor
(input, S1, narrow media,
near narrow media)
removal" on page
4-133.
Replace the staging
deflector assembly. See
"Staging deflector
assembly removal" on
page
4-135.
Go to step 5.
No
Go to step 2.
Go to step 3.
Go to step 4.
Reseat the cable.