No Roll Unit; Manual Printing Is Selected; Manual Printing Is Selected, But A Roll Is Loaded; Paper Jam - Canon imagePROGRAF iPF6400SE User Manual

No Roll Unit.

Cause
The Roll Feed Unit is not
working.

No Roll Unit.

No Roll Unit.
The printer has received a print job, but the Roll Feed Unit is not installed.

Manual printing is selected.

Manual printing is selected.

You have attempted to print on a sheet, but
no sheet is loaded.

Manual printing is selected, but a roll is loaded.

Manual printing is selected, but a roll is loaded.

Cause
A print job for printing on
sheets was sent when a roll is
loaded.

Paper jam.

Paper jam.

A paper jam occurred in the printer during printing.

Paper loaded askew.

Paper loaded askew.

Paper loaded crooked was detected when the paper was advanced.
606
If the message is displayed again despite these measures, contact your Canon dealer for assistance.
Cause
Cause
Press ▲ or ▼ to select Load Paper, and then press the OK button. Load a sheet,
and then print.
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
1.
Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have speci-
fied in the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
Cause
Cause
Corrective Action
Press the Stop button and stop printing.
1.
Turn the printer off and install the Roll Feed Unit.
2.
Turn the printer on and resend the print job.
Corrective Action
Corrective Action
P.345
➔
P.21
➔
Corrective Action
1.
For roll paper, cut the paper on the upper side of the {Paper Feed Slot.
2.
Press the OK button.
3.
Remove the jammed paper.
(See "Clearing Jammed Paper (Paper Feed Slot).")
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet, Fed Manually.")
4.
Load the paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
Corrective Action
P.21
➔
P.576
➔
P.571
➔
P.574
➔
P.340
➔
P.361
➔
Corrective Action
If Roll Paper is loaded, follow the proce-
dure below.
Press the OK button and reload the paper.
(See "Loading Rolls in the Print-
er.")
P.340
➔
If paper is loaded from the Top Paper Feed
Slot, follow the procedure below.
Remove the paper.
Next, use the procedure in Display Screen
in Control Panel.
(See "Loading Sheets in the Feed
Slot.")
P.361
➔
iPF6400SE
User's Guide