Canon imagePROGRAF iPF6400SE User Manual page 444

Menu Settings
Set./Adj. Menu
Limited items are displayed during printing. The displayed items are indicated by annotations.
Test Nozzle Check
Print
Status Print
Interface Print
Paper Details
Print Job Log
Menu Map
Adjust Head
Printer Posi.
Adj.
Feed
Priority
444
Setting Item
Standard
Simple
Other Initial adjustmt
Manual
Adj. Pri- Automatic
ority
Print Quality
Print Length
Adj. Auto(GenuinePpr)
Quality
Auto(OtherPaper)
Description, Instructions
Print a test pattern to check the nozzles.
Print information about the setting values and condition of
the printer.
Print interface settings information.
Print the paper settings as specified in Paper Details.
Print a record of print jobs, including the paper type and
size, amount of ink consumed, and so on. Ink consump-
tion indicates a rough estimate of the amount of ink con-
sumed per print job.( *1 )
Print the menu structure.
An adjustment pattern is printed and the print position is
automatically adjusted to fix misaligned printing. Select
Standard if vertical lines in printed material are warped or
colors are out of alignment. Select Standard also if the
printing results are not improved by executing Simple.
(See "Automatic Adjustment to Straighten Lines and Col-
ors.")
P.514
➔
An adjustment pattern is printed and the print position is
automatically adjusted to fix misaligned printing. Simple
executes a simple adjustment in a short time. Select Sim-
ple when frequently adjusting the printhead, such as dur-
ing daily maintenance. (See "Automatic Adjustment to
Straighten Lines and Colors.")
Printhead position adjustment is executed during the initial
setup. If adjusting the printhead position has not been per-
formed such as due to an error during initial setup or the
state of the operating settings when replacing the print-
head, select Initial adjustmt. (See "Adjustment When In-
stalling the Printhead.")
P.517
➔
Input the setting values from the adjustment pattern print-
ing results and adjust the printing position to fix mis-
aligned printing. Normally, select Standard. However,
when printing on special paper, or if printing is not im-
proved after Standard, try Manual. (See "Manual Adjust-
ment to Straighten Lines and Colors.")
Specify exact paper feeding, if desired. Normally, select
Automatic. Choose Print Quality for attractive printing.
Choosing Print Quality also makes banding less noticea-
ble. Choose Print Length if you prefer to feed the paper
an exact amount.
Specify this mode with paper identified in the Paper Ref-
erence Guide. (See "Displaying the Paper Reference
Guide.")
P.332
➔
The printer prints and reads a test pattern for automatic
adjustment of the feed amount. (See "Automatic Banding
Adjustment.")
P.521
➔
Specify this mode with paper not in the Paper Reference
Guide. (See "Displaying the Paper Reference
Guide.")
P.332
➔
The printer prints and reads a test pattern for automatic
adjustment of the feed amount. Note that this function
takes more time and consumes more ink than Auto(Gen-
uinePpr). (See "Automatic Banding Adjust-
ment.")
P.521
➔
iPF6400SE
P.514
➔
P.516
➔
User's Guide