Color Adjustment - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
• Restore Defaults Button
Click the button to reset to the setting when starting Free Layout.
• Print Button
Click the button to begin printing.
• Update Printer Info. Button
Click the button to acquire printer information.

Color Adjustment

Color Adjustment

You can set the color adjustment.
Adjusting Color
Normally colors should be adjusted in the software application, but if you see colors in the printout that do not
match colors on the screen, you can perform color adjustments.
1
Select Color on Color Mode in the Color Settings panel.
2
Select Color Adjustment.
3
Drag each slider to the left or right to adjust.
Setting
Cyan
Magenta
Yellow
Brightness
Contrast
Saturation
Gray Tone
User's Guide
Adjusts the strength of colors to compensate the hues.
Adjusts the strength of colors to compensate the hues.
Adjusts the strength of colors to compensate the hues.
Adjusts the brightness of the entire image. When the results of the printout are brighter
than the original images such as the original photo before scanning and graphics cre-
ated on the display, or when you want to print in different degrees of brightness, use this
feature.
Adjusts the relative brightness between the brightest and darkest portions of the image.
*For soft gradation, decrease the contrast. For hard gradation, increase the contrast.
Adjusts the hues for vivid color or dark color.
Adjusts gray from cool black (bluish tones) to warm black (reddish tones).
Details
Color Adjustment
297