Canon imagePROGRAF iPF6400SE User Manual page 477

iPF6400SE
2
Select Administrator Mode and click Logon.
• If a password has been set on the printer, enter the password.
Note
3
Click Network in the Device Manager menu at left to display the Network page.
4
Click Edit in the upper-right corner of the TCP/IPv6 group to display the Edit TCP/IPv6 Protocol Settings
page.
5
Refer to the TCP/IPv6 Settings Items table to complete the settings.
TCP/IPv6 Settings Items
Item
Use IPv6
Use DHCPv6
Use a stateless address
Use a manual address
IP Address
Prefix Length
Default Router Ad-
dress
Prefix Length
Primary DNS Server Address
Secondary DNS Server Address
Use the same host name and do-
main name as IPv4
DNS Host Name
DNS Domain Name
Perform dynamic updating of state-
ful addresses
Dynamically update the stateless
address
Dynamically update the manual ad-
dress
6
Click OK to display the Network page.
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers
and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain
Note
Name, respectively.
User's Guide
Configuring the Printer's TCP/IP Network Settings With RemoteUI
Details
Activate to enable IPv6.
Activate when using a DHCPv6 server to acquire the IP ad-
dress.
Activate when using an IPv6-compatible router to acquire the
IP address.
Activate when configuring the IP address manually.
Enter the printer's IP address.
Enter the IP address prefix length.
Enter the default router address.
Enter the prefix length of the default router address.
Specify the IP address of the primary DNS server.
Specify the IP address of the secondary DNS server.
Activate when using the same DNS host and domain names
as for IPv4.
Specify the printer host name, up to 63 characters (1–63
characters). Use single-byte letters, numbers, and - (hy-
phens). Do not use numbers or - for the first character or - for
the last character.
Specify the printer domain name, up to 63 characters. Use
single-byte letters, numbers, - (hyphens), and . (periods). Do
not use numbers, -, or . for the first character, or - or . for the
last character.
Activate this setting to automatically register the stateful ad-
dress with the DNS server.
Activate this setting to automatically register the stateless ad-
dress with the DNS server.
Activate this setting to automatically register the manual ad-
dress with the DNS server.
Default Setting
Off
Off
On
Off
::
0
::
0
::
::
Off
NB-18GBip6xxxxxx
blank
Off
Off
Off
477