The contrast becomes uneven during printing
6
Using the back of the Cleaning Brush, move the Switch to the side opposite ●, corresponding to the size of
the paper for printing.
In this case, note that you will move the switch in the opposite direction from the direction in step 4.
Note
7
Close the Top Cover.
The contrast becomes uneven during printing
The contrast becomes uneven during printing
The paper feed amount is out of adjustment.
The type of paper specified in the printer driv-
er does not match the type loaded in the
printer.
The length of printed images is inaccurate in the feeding direction
The length of printed images is inaccurate in the feeding direction
In the Control Panel menu, Adj. Priority is
set to Print Quality.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
588
The Switch only moves number 1 and the number that
•
matches the paper size. Set all of the switches where the
number does not match the paper size in switches number
2 and higher to the ● side.
Cause
Adjust the feed amount.
Load paper of the same type as you have specified in the printer driver.
Make sure the same type of paper is specified in the printer driver as you have loa-
ded in the printer.
1.
2.
Cause
Set Adj. Priority to Print Length in the Control Panel menu, and then execute Adjust
Length.
(See "Adjusting the Feed Amount.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
Make sure the same type of paper is specified in the printer driver as you have loaded
in the printer.
1.
2.
(See "Adjusting the Feed Amount.")
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
Press the Stop button and stop printing.
Change the type of paper in the printer driver and try printing again.
Press the Stop button and stop printing.
Change the type of paper in the printer driver and try printing again.
Corrective Action
P.520
➔
P.340
➔
P.361
➔
Corrective Action
P.520
➔
P.340
➔
P.361
➔
iPF6400SE
User's Guide