Changing The Type Of Paper - Canon imagePROGRAF iPF6400SE User Manual
Large format printer
Hide thumbs
Also See for imagePROGRAF iPF6400SE:
- User manual (684 pages) ,
- Service manual (43 pages) ,
- Troubleshooting manual (191 pages)
Table of Contents
Advertisement
iPF6400SE
Changing the Type of Paper
Changing the Type of Paper
Follow these steps to change the type of paper specified on the printer after you have loaded paper.
If you will continue using this type of paper later, selecting Keep Paper Type > On will save the time and effort of
configuring the media type setting when you load the paper again. The current media type settings before you se-
lect On will be automatically selected at that time. (See "Using the Same Type of Paper Regularly.")
•
For best printing results, the printer fine-tunes the print head height and the feed amount for each type of paper.
Be sure to select the type of paper to use correctly before printing.
Important
•
Because the printer fine-tunes the feed amount for each type of paper, the margins and the size of printed im-
ages may vary depending on the type of paper used. If margins and the size of images are not as you expected,
adjust the paper feed amount.
(See "Adjusting the Feed Amount.")
Changing the Type of Paper
•
When you load a roll, a menu for selection of the type of paper is shown on the Display Screen. Select the type of
paper, and then press the OK button.
Note
If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll length after
the type of paper. (See "Specifying the Paper Length.")
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab (
•
If the Tab Selection screen is not displayed, press the Menu button.
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Chg. Paper Type, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper loaded (Roll Paper or Manual Paper), and then press the OK
button.
5
Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.
•
Be sure to select the correct paper type. If this setting does not match the loaded paper, it may cause
feed errors and affect printing quality.
Important
•
For details on types of paper, see the Paper Reference Guide. (See "Types of Paper.")
fault, Plain Paper is selected.
Note
User's Guide
P.520
➔
).
P.344
➔
Changing the Type of Paper
P.344
➔
By de-
P.328
➔
343
Advertisement
Table of Contents
Troubleshooting
