Canon imagePROGRAF iPF6400SE User Manual page 342

Loading Rolls in the Printer
5
Insert the edge of the roll in the Paper Feed Slot (a)
and advance the roll until you hear the feed tone.
Important
6
Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and
the barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.")
ManageR-
emainRoll
Off
On
Note
7
Close the Roll Feed Unit Cover.
Important
342
Note
• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the
printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing
surface.
• If the paper is wrinkled or warped, straighten it out before loading it.
Load paper straight so it is not fed askew.
•
Barcodes
Printed A menu for selection of the type of paper is shown on the Display Screen.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Not prin-
ted
Printed The type and amount of paper left is automatically detected based on the barcode printed on the
roll.
There is no need to specify the type and length of the paper.
Not prin- A menu for selection of the type and length of paper is shown on the Display Screen.
ted Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.
• For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper Ref-
erence Guide.")
P.332
➔
• Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled. (See "Specify-
ing the Cutting Method for Rolls.")
• Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing quali-
ty. (See "Automatic Adjustment to Straighten Lines and Colors.")
• If you set the detection of paper leading edge to Do not perform, a margin of about 23 cm is created at
the paper leading edge when printing starts. (See "Specifying the Cutting Method for Rolls.")
Printer Operation After the Paper is Fed
P.350
➔
➔
iPF6400SE
P.348
➔
P.514
P.350
➔
User's Guide