Roll Feed Unit Error; No Roll Unit; Manual Printing Is Selected; Manual Printing Is Selected, But A Roll Is Loaded - Canon imagePROGRAF iPF6400 User Manual

Roll feed unit error.

Cause
The roll is empty.
There is remaining
roll paper, but be-
cause it could not be
advanced, it could
not be detected.
Roll feed unit error.
Roll feed unit error.
Cause
The Roll Feed Unit is not working.

No Roll Unit.

No Roll Unit.
The printer has received a print job, but the Roll Feed Unit is not installed.

Manual printing is selected.

Manual printing is selected.
You have attempted to print on a sheet, but no
sheet is loaded.

Manual printing is selected, but a roll is loaded.

Manual printing is selected, but a roll is loaded.
Cause
A print job for printing on sheets was
sent when a roll is loaded.

Wrong paper feed slot for manual paper.

Wrong paper feed slot for manual paper.
Cause
The Paper Feed Slot used to load the
918
sheet is different from the Paper Feed Slot
specified in Paper Source in the printer
driver.
4.
When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed on the
roll, also specify the paper length.
(See "Specifying the Paper Length.")
5.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
If no message appears, printing will continue from the next page.
The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be helpful to change the
printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
Turn off the printer, remove the Roll Feed Unit momentarily, and then reinstall it.
(See "Removing the Roll Feed Unit.")
(See "Installing the Roll Feed Unit.")
If the message is displayed again despite these measures, contact your Canon dealer for assistance.
Cause
Cause
Press ▲ or ▼ to select Load Paper, and then press the OK button. Load a sheet, and
then print.
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
1.
Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have specified in
the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
Load the sheet in the Paper Feed Slot matching the printer driver Paper Source setting as fol-
lows.
1.
Press ▲ or ▼ to select Eject Paper, and then press the OK button to stop printing.
The sheet is now ejected.
Corrective Action
→P.537
Corrective Action
→P.551
→P.552
Corrective Action
Press the Stop button and stop printing.
1.
Turn the printer off and install the Roll Feed Unit.
2.
Turn the printer on and resend the print job.
Corrective Action
→P.26
Corrective Action
→P.538
→P.26
Corrective Action
→P.61
User's Guide
iPF6400