Canon imagePROGRAF iPF6400SE User Manual page 351

iPF6400SE
Cutting Method
Manual Select this for paper that cannot be cut with the
(when us- Cutter Unit and for paper of which the leading edge
curls strongly and rubs the printhead.
ing media
Use scissors to cut each document from the roll af-
that cannot
ter printing. For continuous printing (if you will cut
be cut with
the Cutter each page later), select Auto Cut > Yes or select
Unit ) Print Cut Guideline.
Paper cut- Choose this option if you want to cut pages by
ting (to pressing Cutter Unit buttons for manual cutting after
have the printing when Auto Cut > No is selected or Print
Cut Guideline is selected in the printer driver.
roll cut at
Otherwise choose this option if you want to cut the
your speci-
fied posi- roll edge after loading a roll.
tion)
• Automatic and Eject are valid only when you have selected Auto Cut > Yes in the printer driver.
• With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
Note
• Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the
preset cutting mode.
If documents printed using Automatic, Eject, or manual cutting are short, rolls are advanced a specific amount be-
•
fore cutting to prevent problems with cutting and paper ejection. This may create a wider bottom margin, in some
cases.
Cut rolls manually in the following cases:
Eject (when the paper surface is being scratched / to wait for ink to dry)
• When cutting wide printed documents after ejection, have two people support the documents. If the paper drops,
printed documents may be damaged.
Important
• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing
quality or cause rough cut edges.
• Once the following step has been performed, the procedure can be started from step 7 the next time.
Note • Printing the second and subsequent times
• Printing after replacing with the same type of paper
User's Guide
Specifying the Cutting Method for Rolls
Printer Setting
Media Auto Cut
Manual
Menu > (See "Cut-
Paper De- ting Roll
tails >
Paper After
(Various
Print-
Types of
ing.")
Paper) >
➔
Cutting
Mode
Cut button Yes
pressed
Driver Setting
No, Yes, Print
Cut Guideline
P.135
No, Print Cut
Guideline
351