Canon imagePROGRAF iPF6400SE User Manual page 414

Add Custom Paper
11
The Test Print Settings dialog box is displayed.
Select the print priority and print quality of the test
print using Print Priority and Print Quality.
Set the level to test print using Maximum ink usage
and the image to use using Image used in test
print, and then click the Start Print button.
12
Determine and set the ink level that is thought to give
the best visual test print results with no bleeding or
scraping of ink.
Note
414
Select the optimal ink level by referring to the help.
•
• If you cannot obtain sufficiently high quality printing no matter which maximum ink usage level you select,
use the Step 1: Select the standard paper dialog box to change the paper that is the basis of the cus-
tom paper to another paper.
• Because this settings imposes an upper limit on the amount of ink used during printing, the printing result
might not change even if the level is changed depending on the image.
• The color tone cannot be configured using the Media Configuration Tool. Although the color tone may
change when the maximum ink usage is changed, at this point you should select the optimal level by only
focusing on bleeding and scraping of ink. If the color tone needs to be adjusted, provide an ICC color
profile that matches the paper you are using, and select that ICC color profile in your software. For details
on how to specify the ICC profile in the printer driver, see "Matching Sheet ."
• Depending on the maximum ink usage setting, some of the print qualities in the printer driver may be-
come unselectable.
iPF6400SE
P.156
➔
User's Guide