Borderless Printing By Resizing Originals To Fit The Roll Width (Mac Os) - Canon imagePROGRAF iPF6400SE User Manual

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)

7
Click the Page Setup tab to display the Page Setup
sheet.
8
A
In the Page Size list, click the size of the original as specified in the application. In this case, click ISO
A4.
9
Select and click a roll paper in the
10
Select the
play the Information dialog box.
11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
13
C
In Borderless Printing Method, make sure
14
Confirm the print settings and print as desired.
Note
78
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the follow-
ing example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll
Holder. (See "Loading Rolls on the Roll Holder.")
L
B
Borderless Printing check box to dis-
• For tips on confirming print settings, see "Confirming Print Settings ."
Paper Source list.
E
Scale to fit Roll Paper Width is selected.
P.338
➔
iPF6400SE
P.143
➔
User's Guide