Matching - Canon imagePROGRAF iPF6400SE User Manual

Matching

Note
Adjusting Monochrome
Use the monochrome setting to print monochrome images of color photographs captured with a scanner or digital
camera or other color images.
1
Select Monochrome on Color Mode in the Color Settings panel.
2
Select Color Adjustment.
3
Drag each slider to the left or right to adjust.
Brightness
Contrast
Note
298

Matching

Matching
You can set the matching.
• If No color correction is selected under Color Mode, the Matching is not displayed.
Important
• You can also click the up or down arrow, or enter the number directly to increase or decrease the value.
Setting
Adjusts the brightness of the entire image. When the results of the printout are brighter
than the original images such as the original photo before scanning and graphics cre-
ated on the display, or when you want to print in different degrees of brightness, use this
feature.
Adjusts the relative brightness between the brightest and darkest portions of the image.
*For soft gradation, decrease the contrast. For hard gradation, increase the contrast.
• You can also click the up or down arrow, or enter the number directly to increase or decrease the value.
Details
iPF6400SE
User's Guide