Roll Feed Unit Error; No Roll Unit; Manual Printing Is Selected; Manual Printing Is Selected, But A Roll Is Loaded - Canon iPF6400S User Manual

Roll feed unit error.

Roll feed unit error.
Roll feed unit error.
Cause
The Roll Feed Unit is not working.

No Roll Unit.

No Roll Unit.
The printer has received a print job, but the Roll Feed Unit is not installed.

Manual printing is selected.

Manual printing is selected.
You have attempted to print on a sheet, but no
sheet is loaded.

Manual printing is selected, but a roll is loaded.

Manual printing is selected, but a roll is loaded.
Cause
A print job for printing on sheets
was sent when a roll is loaded.

Wrong paper feed slot for manual paper.

Wrong paper feed slot for manual paper.
Cause
The Paper Feed Slot used to load the
sheet is different from the Paper Feed
Slot specified in Paper Source in the
printer driver.
906
Turn off the printer, remove the Roll Feed Unit momentarily, and then reinstall it.
(See "Removing the Roll Feed Unit.")
(See "Installing the Roll Feed Unit.")
If the message is displayed again despite these measures, contact your Canon dealer for assistance.
Cause
Cause
Press ▲ or ▼ to select Load Paper, and then press the OK button. Load a sheet, and
then print.
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have specified
in the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
Load the sheet in the Paper Feed Slot matching the printer driver Paper Source setting as
follows.
1.
Press ▲ or ▼ to select Eject Paper, and then press the OK button to stop printing.
The sheet is now ejected.
2. Load the paper in the Paper Feed Slot specified in the printer driver.
The printer will resume printing.
Change the printer driver Paper Source setting to match the Paper Feed Slot where the sheet
is loaded as follows.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. In the printer driver, change the Paper Source setting to match the Paper Feed Slot where
the sheet is loaded, and then resend the print job.
Corrective Action
P.492
➔
P.493
➔
Corrective Action
Press the Stop button and stop printing.
1. Turn the printer off and install the Roll Feed Unit.
2. Turn the printer on and resend the print job.
Corrective Action
P.25
➔
Corrective Action
P.478
➔
P.25
➔
Corrective Action
iPF6400S
User's Guide