Canon imagePROGRAF iPF6400SE User Manual page 339

iPF6400SE
• When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. We recom-
mend wearing clean cloth gloves when handling rolls to protect the printing surface.
Important
• Use scissors or a cutting tool to cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise,
it may cause feeding problems and affect the printing quality. Be careful not to cut through any barcodes printed
on the roll.
• Align the edges of the paper on both ends of the roll. Otherwise, it may cause feeding problems.
For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See "Paper
•
Sizes.")
P.328
➔
Note
• To view instructions as you attach the Roll Holder, press the Navigate button. (See "How to View Instructions with
Navigate.")
P.430
➔
1
Remove the Holder Stopper from the Roll Holder.
2
Insert the attachments for the roll paper on the Roll Holder.
• Using rolls with a 3-inch paper core
Attach the included 3-Inch Paper Core Attachment on
the Roll Holder.
Align the triangular part (b) of the 3-Inch Paper Core At-
tachment (a) with the triangular part (c) of the Roll Hold-
er as shown, and insert the 3-Inch Paper Core Attach-
ment into the Roll Holder.
Use the Holder Stopper for 3-inch paper cores.
• Borderless printing on A1 or A2 rolls
Attach the included Spacer for Borderless Printing to the Roll
Holder.
Insert the protrusions (b) of the Spacer for Borderless Printing
(a) into the holes (c) of the Roll Holder, as shown.
User's Guide
(See "Displaying the Paper Reference Guide.")
Loading Rolls on the Roll Holder
P.332
➔
339