iPF6400SE
Roll Holder (for 2- and 3-inch paper cores)
•
Attachments
•
Using Rolls with a 2-inch Paper Core
Holder Stopper (for 2-inch paper cores)
•
Borderless Printing on A1 or A2 Rolls
Spacer for Borderless Printing
Removing the Roll Feed Unit
Removing the Roll Feed Unit
•
Always turn off the printer before removing the Roll Feed Unit. The printer may be damaged if you do not turn it
off first.
Important
1
Remove the roll from the Roll Feed Unit. (See "Removing the Roll from the Printer.")
2
Use a coin or screwdriver to loosen the screws (a) on
both sides of the back of the Roll Feed Unit, and re-
move the screws.
User's Guide
Using Rolls with a 3-inch Paper Core
Holder Stopper (for 3-inch paper cores)
Removing the Roll Feed Unit
3-Inch Paper Core Attachment
P.345
➔
359