Canon imagePROGRAF iPF6400SE User Manual page 447

iPF6400SE
System
Date Format
Setup
Language
Time Zone
Length Unit
Detect Mismatch
Paper Roll Selection 1
Size Ba-
sis
Roll Selection 2
Keep Paper Size
TrimEdge Reload
Rep.P.head Print
User's Guide
Setting Item Description, Instructions
Specify the date format.
Specify the language used on the Display Screen.
Specify the time zone. Time zone options indicate a main
city in this time zone and the difference from Greenwich
Mean Time.
Choose the display unit for length. Change the unit dis-
played for the remaining amount of roll paper, Tot.Print
Area, and so on.
Specify printing behavior if the type and size of paper
specified in the printer menu does not match the type and
size in the printer driver.
Choose Pause to have printing paused under these cir-
cumstances. Choose Warning to continue printing after
notification. Choose None to continue printing without no-
tification.
If roll size detection is activated, choose whether ISO A3
(297mm) or 300mm Roll is applied when a roll of an in-
termediate width is detected.
If roll size detection is activated, choose whether 10in.
(254mm) or JIS B4 (257mm) is applied when a roll of an
intermediate width is detected.
Choose On to use the paper size setting as the basis for
printing instead of other settings. The margin setting of the
printer menu will be used instead of the margin setting of
the printer driver if the latter is smaller, which may prevent
text or images in the margin from being printed.
Choose Off to give priority to margin settings. The larger
value is used if the margin specified in the printer driver
does not match the margin in the printer menu.
Specify whether to trim the leading edge of the currently
retracted roll when the roll is advanced. Cut the edge if
you are concerned about any marks left on the roll when
the roll is left in the retracted position.
Specify On to have rolls cut when printing begins after
Sleep mode or when the power is restored. Selecting Au-
tomatic will trim the edge when the roll has been in the
retracted position for two days or more.
Choose On to have the printer automatically execute the
Advanced Adj. operations after you replace the Print-
head. (See "Automatic Adjustment to Straighten Lines and
Colors.")
P.514
➔
Menu Settings
447