The Roll Is Empty; Roll Feed Unit Error; No Roll Unit - Canon 3807B007 User Manual

Cause
A print job for rolls was received
when a sheet is loaded.

The roll is empty.

Cause
The roll is empty. Follow these steps to replace the used roll with a new roll of the same type and size.
1. Press the OK button and remove the roll.
2. Load the new roll.
3. If no barcode was printed on the roll, specify the type of paper.
4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode
5. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen,
There is remaining The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be help-
roll paper, but be- ful to change the printing mode, which will change the paper feed timing.
cause it could not Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
be advanced, it (See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
could not be de-
tected.

Roll feed unit error.

Cause
The Roll Feed Unit is not
working.

No Roll Unit.

The printer has received a print job, but the Roll Feed Unit is
not installed.
iPF6300
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
(See "Changing the Type of Paper.")
is not printed on the roll, also specify the paper length.
(See "Specifying the Paper Length.")
press the OK button.
Printing will resume, starting from the page on which the error occurred.
Turn off the printer, remove the Roll Feed Unit momentarily, and then reinstall it.
(See "Removing the Roll Feed Unit.")
(See "Installing the Roll Feed Unit.")
If the message is displayed again despite these measures, contact your Canon dealer for
assistance.
Cause
Error Message >
Corrective Action
Corrective Action
→P.728
→P.730
→P.718
→P.722
→P.725
→P.727
Corrective Action
→P.743
→P.744
Corrective Action
Press the Stop button and stop printing.
1. Turn the printer off and install the Roll Feed Unit.
Connect the Roll Unit Cable firmly and completely.
Messages regarding paper >
→P.51
The roll is empty.
12
983