Cutting Roll Paper After Printing (Mac Os) - Canon imagePROGRAF iPF6400SE User Manual

Cutting Roll Paper After Printing (Mac OS)

6
To enable automatic cutting, click Yes in the
yourself, click Print Cut Guideline.
7
Click OK to close the Roll Paper Options dialog box.
8
Confirm the print settings and print as desired.
Note
Roll paper will be automatically cut after printing.

Cutting Roll Paper After Printing (Mac OS)

Cutting Roll Paper After Printing (Mac OS)
This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to
print a cut line for manual cutting.
• The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps
below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
Note
1
This sets the
Note
2
Select the printer in the
3
Choose the original size in the
4
If you configured the settings using the Page Attributes dialog box, click
then select Print from the application software menu.
136
• For tips on confirming print settings, see "Confirming Print Settings ."
B C
Format for and Paper Size.
The configuration method varies depending on the
•
OS and application software you are using.
If Page Setup is displayed in the application menu,
the settings are configured by opening the Page At-
tributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the
upper part of the printer driver displayed when you se-
lect Print from the application software menu.
A
Printer list.
F
Paper Size list.
A
Automatic Cutting list. If you prefer to cut the paper later
iPF6400SE
P.143
➔
F
OK to close the dialog box, and
User's Guide