Cleaning The Paper Retainer - Canon imagePROGRAF iPF6400SE User Manual

Cleaning the Paper Retainer

Cleaning the Paper Retainer
Cleaning the Paper Retainer
Clean the Paper Retainer about once a month to maintain better printing quality and help prevent problems.
Also clean the Paper Retainer in the following situations to ensure optimal operation.
If the printed surface or the underside of paper is dirty after printing
•
After printing on small paper
•
• During cleaning, use paper that does not generate much cutting dust, such as Plain Paper. It may affect printing
quality if you use film or other media that are more likely to generate debris when cut, or that have a surface finish
Important
that may come off.
1
Turn the printer off. (See "Turning the Printer On and Off.")
2
Unplug the power cord from the outlet.
Caution
3
Remove the Roll Feed Unit. (See "Removing the Roll Feed Unit.")
4
Fold a sheet of Plain Paper two or three times (a) and
insert it under the Paper Retainer (b) from behind the
printer to wipe the entire surface of the Paper Retainer
clean.
5
Attach the Roll Feed Unit. (See "Installing the Roll Feed Unit.")
6
Plug the power cord into the outlet.
556
• Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leav-
ing the printer on poses a risk of injury if you touch moving parts inside the printer.
P.17
➔
P.359
➔
P.360
➔
iPF6400SE
User's Guide