Canon imagePROGRAF iPF6400SE User Manual page 276

Output Settings Panel
The following settings are available for enlarged/reduced printing.
Fit Paper Size
Fit Roll Paper Width
Scaling
• Borderless Printing
You can print the media without margins on all sides when the roll paper with the specific width and the specif-
ic media type is used.
For more information about Borderless Printing, see "Print with No Borders."
• Available only if rolls are selected in Paper Source.
• This is not displayed when a checkmark is placed in Print Centered.
Note
• Paper Size
You can select the size of the print media.
• This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.
Note
• Print Centered
You can print on the center of the media loaded in the printer.
For more information about Print Centered, see "Print on the Center."
• This is not displayed when a checkmark is placed in Borderless Printing.
Note
• No Spaces at Top or Bottom
You can save paper on not to feed roll paper for the empty spaces when the print data contains spaces at the
top or bottom.
For more information about No Spaces at Top or Bottom, see "Not Print Spaces at the Top/Bottom."
• Available only if rolls are selected in Paper Source.
Note
• Rotate Page
Select the method for rotating page.
The following settings are available for rotating page.
276
Rotate Right 90 Degrees
Rotate Left 90 Degrees
Rotate 180 degrees
Setting
Enlarges/reduces the whole page automatically to fit the media size selected for output.
Select the media size to print from Paper Size.
Enlarges/reduces the whole page automatically to fit the width of the roll paper with the
page width.
*Make sure that the width of the roll paper in the printer is set correctly for Roll Paper
Width in the Paper Settings panel.
*Displayed only if rolls are selected in Paper Source.
Enlarges/reduces the whole page by the scaling rate as specified. Input the scaling value
in numerical characters. You can specify a range between 5 and 600%.
*You can change the numbers by clicking either ▲ button or ▼ button.
*Although Scaling can be set to make the image larger than the media size, the part that
does not fit in the media cannot be printed.
*This is not displayed when a checkmark is placed in Borderless Printing.
Setting
Rotates the portrait page right 90 degrees and print in landscape orientation. When the
rotated page can fit in the width of roll paper, the page is rotated automatically, and when
it can not fit in the width of roll paper, the page is not rotated.
Rotates the portrait page left 90 degrees and print in landscape orientation. When the ro-
tated page can fit in the width of roll paper, the page is rotated automatically, and when it
can not fit in the width of roll paper, the page is not rotated.
Allows you to rotate the image 180 degrees from the vertical to the right.
Details
P.284
➔
P.285
➔
Details
iPF6400SE
P.285
➔
User's Guide