Print Selected Area(Excel) - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
12
If the upper and lower margins are too wide, check No Spaces at Top or Bottom (Conserve Paper).
The upper and lower margins can be checked in Print Preview.
• When Print in Draft mode is selected, printing is fast but the print quality is poor.
When Saturation is selected, you can print posters, etc., vividly.
Note •
• Press the Print Preview button to display the preview screen. You can check and make changes to the
layout in the preview screen.
• When you print to the edge of the roll width, the maximum print length is 18.0m.
13
Press Print to start printing.
• If divided into plural pages, try reducing the data size or the range you select.
Important • You cannot run Print or Print Preview if you select it for a worksheet with no data displayed.

Print Selected Area(Excel)

Print Selected Area(Excel)

For resizing the selected range of cells to fit the roll width. Choose this option to enlarge a particular part of the
sheet before printing.
1
Start Microsoft Excel.
2
If Start imagePROGRAF Print Plug-In is displayed, click it.
3
Click Print from the imagePROGRAF Print Plug-In toolbar/ribbon.
• When more than one worksheet is selected, the Printing Wizard cannot be run. Select only one work-
sheet and click Print again.
Important
If a print area is set, a confirmation message dialog box will
appear.
To print the selected area, cancel the setting of the print area.
The Printing Wizard dialog box is displayed.
User's Guide
Print Selected Area(Excel)
243