Canon imagePROGRAF iPF6400SE User Manual page 341

iPF6400SE
1
Press the Load button.
2
Press ▲ or ▼ to select Roll Paper, and then press the OK button.
• If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.
Note
3
Open the Roll Feed Unit Cover.
4
Holding the Roll Holder flange (a), load the Roll Hold-
er shaft into the guide grooves (b) on both sides of
the Roll Holder Slot. At this time, load the shaft so
that the color of the Roll Holder shaft (c) matches the
color of the guide groove.
• Do not release the flanges until you load the holder fully in the Roll Holder Slot. Rolls are heavy, and
dropping a roll may cause injury.
Caution
• Be careful not to pinch your fingers between the guide grooves (b) and the Roll Holder shaft (c) when
loading rolls.
Do not force the Roll Holder into the printer with the right and left ends reversed. Otherwise, it may dam-
•
age the printer or Roll Holder.
Important
• If it is difficult to load rolls from the front of the printer, load rolls from the back of the printer.
Note
User's Guide
Loading Rolls in the Printer
341