Roll Paper Is Not Securely In Contact With Roll Holder - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
Cause
The paper is loaded askew.

Roll paper is not securely in contact with roll holder.

Roll paper is not securely in contact with roll holder.

Skew Check Lv. on the Control Panel menu is set to some-
thing other than Off and the roll paper is not placed securely
in the Roll Holder during loading.
User's Guide
Select None when you have set Detect Mismatch in the Control Panel menu to Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The
document will be printed with a border.
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Cause
Roll paper is not securely in contact with roll holder.
Corrective Action
Corrective Action
Follow these steps to reload the roll.
1.
Press the OK button and remove the roll holder from the printer.
2.
Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Loading Rolls on the Roll Holder.")
3.
Load the Roll Holder in the printer.
P.338
➔
609