Ink Level Detection - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
Cause
You have just finished initial in-
stallation, when more ink is con-
sumed to fill the system.
The Printhead nozzles are clog-
ged.

Ink Level Detection

Ink Level Detection
Ink level detection will be deactivated if you load ink tanks once emptied.
Ink level detection
Ink tanks specified for this printer feature an ink level detection function to prevent the ink from running out during
printing, which prevents printer damage. (See "Ink Tanks.")
This function will not work correctly if you use refill ink tanks. As a result, printing stops. Thus, before using refill ink
tanks, you must cancel the ink level detection.
Printing with the ink level detection canceled may lead to printer damage and printing problems. Canon Inc. is not
liable for any damage that may occur as a result of refilling ink.
• After ink level detection has been released, this function cannot be reactivated for currently loaded Ink Tank. To
use ink level detection again, replace the Ink Tank with new ones specified for use with the printer.
Important
• Repeatedly removing and inserting an Ink Tank may damage the connection between the Ink Tank and the print-
er, which may cause ink leakage from the Ink Tank and damage the printer.
Releasing ink level detection
1
On the Display Screen, a message indicates that the ink level cannot
be detected. After checking the message, press the ▶ button.
2
Press ▲ or ▼ to select Information, and then press the OK button.
3
A confirmation message is shown on the Display Screen about re-
leasing ink level detection. After checking the message, press the ▶
button.
User's Guide
After initial installation or at the first-time use after transfer, ink flows into the system between the
Ink Tank and Printhead.
Although the amount of remaining ink may drop as a result, it does not indicate a problem.
Check for nozzle clogging.
(See "Checking for Nozzle Clogging.")
Corrective Action
P.538
➔
P.530
➔
Ink Level Detection
595