Other Settings; Specifying Printer-Related Information - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE

Other Settings

Other Settings

Specifying Printer-Related Information ................................................................................................................. 489

Configuring the Communication Mode Manually .............................................................................................. 490
Email Notification When Printing is Finished or Errors Occur ..................................................................... 491
Initializing the Network Settings ................................................................................................................................ 491
Specifying Printer-Related Information
Specifying Printer-Related Information
Follow the steps below to specify device information and security settings.
1
Start the web browser and enter the following URL in the Location (or Address ) box to display the Remo-
teUI page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2
Select Administrator Mode and click Logon.
• If a password has been set on the printer, enter the password.
Note
3
Click Information in the Device Manager menu at left to display the Information page.
4
To display the relevant settings page, click Edit in the upper-right corner of Device Information or Securi-
ty, depending on what information you want to specify.
To change the administrator password, click the Change Password button in the Security group.
5
Refer to the table of settings for device information and security as you complete these settings.
Security setting items are displayed when you click the Change Password button in the Security group.
Device Information Settings
Item
Device Name
Location
Administrator
Phone
Comments(E-mail)
Security Settings
Item
New Password
Confirm
*1: On the Security settings screen, besides entering a password, you can specify other security-related information,
such as IP address-based SNMP or TCP usage restrictions, MAC address-based access restrictions, or IPP and FTP
authentication settings.
6
Click OK to activate the settings.
User's Guide
Details
Enter a device name.
(0–32 characters)
Enter the location where the device is installed.
(0–32 characters)
Enter the administrator's name.
(0–32 characters)
Enter the administrator's contact information.
(0–32 characters)
Enter any comments regarding the administrator.
(0–32 characters)
Details
Enter the new password.
(0-9999999)
Enter the new password again to confirm it.
(0-9999999)
Specifying Printer-Related Information
Default Setting
blank
blank
blank
blank
blank
Default Setting
blank
blank
489