Canon imagePROGRAF iPF6400SE User Manual page 79

iPF6400SE
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at
the edges. If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed
Important
Settings dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once
printed and cut, please cut the upper and lower bands with scissors.
Document: Any type
•
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
•
Paper: Roll
•
Paper type: Canon Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
•
1
Choose Page Setup from the application menu to display the Page Attributes dialog box.
The configuration method varies depending on the
•
OS and application software you are using.
Note
If Page Setup is displayed in the application menu,
the settings are configured by opening the Page At-
tributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the
upper part of the printer driver displayed when you se-
lect Print from the application software menu.
2
Select the printer in the
3
C
In Paper Size, click the size of the original. In this case, click ISO A4.
• All sizes are available in borderless printing if you resize originals to fit the roll width.
Note
4
F
Click OK to close the dialog box.
5
In the application, create an original that takes up the entire space of the paper size.
6
Choose Print in the application menu.
User's Guide
B
Format for list.
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
79