iPF6400SE
Removing Rolls From the Roll Holder
Removing Rolls From the Roll Holder
1
Remove the Holder Stopper from the Roll Holder.
2
Remove the roll from the Roll Holder.
3
Remove any attachments as follows.
3-Inch Paper Core Attachment
•
Spread the tips (b) of the 3-Inch Paper Core At-
tachment that protrude by the triangular label (a)
of the Roll Holder as shown and remove the 3-
Inch Paper Core Attachment.
Spacer for Borderless Printing
•
Remove the Spacer for Borderless Printing from the Roll
Holder as shown.
•
Store the roll in the original bag or box, away from high temperature, humidity, and direct sunlight. If paper is not
stored properly, the printing surface may become scratched, which may affect the printing quality when you use it
Important
again.
User's Guide
Removing Rolls From the Roll Holder
347