In An Emergency; Moving The Printer - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE

In an Emergency

• If the printer emits smoke or strange odors, continuing to use the printer may cause a fire or electrical shock.
Switch the printer off immediately and remove the power plug from the power outlet. Contact the nearest service
Warning
center.
Cleaning the Printer
For cleaning, use a cloth dampened in water. Never use flammable solvents such as alcohol, benzene, or thinner.
•
If these substances come into contact with electrical components inside the printer, there is a risk of fire or electri-
Warning
cal shock.
• Always disconnect the power cable from the outlet before cleaning the printer. If the printer is switched on acci-
dentally, moving parts inside the printer may cause personal injuries.
Caution
Pacemakers
• This printer generates a low-level magnetic field. Anyone wearing a pacemaker who experiences discomfort while
working around the printer should leave the area. Consult a physician before continuing to work around the printer.
Warning

Moving the Printer

• Moving the printer requires at least three people, holding it on both sides. Be careful to avoid back strain and other
injuries.
Caution
• When carrying the printer, securely grasp the Carrying Handles on the left and right sides of the base. Holding the
printer at other positions is dangerous and poses a risk of injury and damage if the printer is dropped.
Printhead, Ink Tanks, and Maintenance Cartridge
• Always store consumables in a safe location out of the reach of small children. If a child licks or ingests ink acci-
dentally, seek medical assistance immediately.
Caution
• If ink accidentally gets in your eyes, immediately rinse with water.
If ink gets on your skin, immediately clean it off with soap and water.
If irritation persists in your eyes or on your skin, contact a physician immediately.
• Avoid dropping or shaking printheads, ink tanks, and maintenance cartridges. Spilled ink can stain clothing and
the work area.
• Never touch the electrical contacts of the Printhead after printing. The contacts become extremely hot and can
cause minor burns.
Other
• Never disassemble the printer or attempt repairs. There are high voltage parts inside the printer that can cause a
fire or electrical shock.
Warning
• Never use flammable sprays around the printer. The gas of flammable sprays can cause a fire or electrical shock,
if it contacts high voltage points inside the printer.
• Never touch the cutting edge of Cutter Unit (a). This could cause personal injury.
User's Guide
Safety Precautions
625