Removing The Roll From The Printer - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
5
Press ▲ or ▼ to select the length of paper loaded in the printer, and then press the OK button.
Specify the roll length as follows.
1.
Press the ◀ or ▶ button to move to the next field for input.
2.
Press the ▲ or ▼ button to enter the value.
3.
Repeat steps 1 and 2 to finish entering the value, and then press the OK button.

Removing the Roll from the Printer

Removing the Roll from the Printer

Remove rolls from the printer as follows.
• Once a roll has been advanced, do not pull the paper out by force. This will prevent further feeding, and the print-
er will be unable to keep track of the amount of roll paper left.
Important
If you accidentally pull out paper, follow these steps to remove the roll, and open the paper feed slot.
• If you need to cut the roll, see "Specifying the Cutting Method for Rolls."
Note
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the ( Paper tab) .
• If the Tab Selection screen is not displayed, press the Menu button.
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4
Press ▲ or ▼ to select Yes, and then press the OK button.
The roll is rewound.
If you have selected ManageRemainRoll > On in
•
the Control Panel menu, a barcode is printed on
Important
the leading edge of the roll.
Do not remove the roll before the barcode is prin-
ted. You will be unable to keep track of the amount
of roll paper left. (See "Keeping Track of the Amount of Roll Paper Left.")
5
Open the Roll Feed Unit Cover.
User's Guide
Removing the Roll from the Printer
P.350
➔
P.348
➔
345