Turning The Printer On And Off - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
Enlarged/reduced printing
•
You can freely adjust the size of originals by enlarging or reducing originals before printing.
(See "Resizing Originals to Match the Paper Size.")
(See "Resizing Originals by Entering a Scaling Value.")
Free Layout (Windows) and imagePROGRAF Free Layout (Mac OS)
•
Print multiple documents from multiple applications (such as word-processing programs, spreadsheet pro-
grams, and so on) next to each other.
(See "Printing Multiple Originals Next to Each Other.")

Turning the Printer On and Off

Turning the Printer On and Off
Turning the printer on
1
Press the Power button to turn on the printer.
The printer will now start up.
After the Display Screen shows the Canon logo, "Starting up...
Please wait." is displayed.
2
The Power Lamp is lit when the printer finishes starting up, and
the printer is now in Standby.
The printer will not go into Standby in the following situations.
Take the appropriate action.
• The Top Cover is open
Close the Top Cover.
• The Ink Tank Cover is open
Close the Ink Tank Cover.
• The Printhead is not installed
see "Replacing the Printhead."
• An Ink Tank is not installed
see "Replacing Ink Tanks."
• If "ERROR" is shown on the Display Screen
see "Error Messages."
• The Power Lamp and Message Lamp are not lit (even once), and nothing appears on the
Display Screen
Make sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet.
Starting the printer when it is connected via the USB cable to a Mac OS computer that is off may cause the com-
•
puter to start up at the same time. To prevent this, disconnect the USB cable before starting the printer. Connect-
Important
ing the printer to the computer via a USB hub may solve this issue.
User's Guide
P.50
➔
➔
P.95
➔
P.540
➔
P.530
➔
P.600
➔
P.56
Turning the Printer On and Off
17