The Printer Stops During A Print Job; An Error Message Is Shown On The Display Screen; The Printer Ejects Blank, Unprinted Paper - Canon imagePROGRAF iPF6400SE User Manual

An error message is shown on the Display Screen

The printer stops during a print job

The printer stops during a print job

An error message is shown on the Display Screen .......................................................................................... 580

The printer ejects blank, unprinted paper ............................................................................................................ 580

An error message is shown on the Display Screen An error message is shown on the Display Screen
The last portion of roll paper was used during a print job, and paper could
not be advanced because the trailing edge is taped to the roll.
The printer ejects blank, unprinted paper
The printer ejects blank, unprinted paper
Cause
The leading edge of the roll paper
was cut to straighten it.
The Printhead nozzles are clogged.
A print job was received from an in-
compatible printer driver.
The printer is damaged.
580
Cause
The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value
other than Off in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
Print a test pattern to check the nozzles and make sure the Printhead is in good condition
for printing.
(See "Checking for Nozzle Clogging.")
Use the correct imagePROGRAF printer driver for the printer and try printing again.
Contact your Canon dealer for assistance.
Corrective Action
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
(See "Loading and Printing on Rolls.")
Corrective Action
P.356
➔
P.538
➔
iPF6400SE
P.345
➔
P.347
➔
P.18
➔
User's Guide