Borders Appear In Borderless Printing - Canon imagePROGRAF iPF6400SE User Manual

Borders appear in borderless printing

Borders appear in borderless printing
Borders appear in borderless printing
When executing borderless printing on A1 (594 mm)
or A2 (420 mm) rolls, the Spacer for Borderless
Printing was not attached to the Roll Holder.
The paper selected for borderless printing at actual
size was wider than the actual page size.
The printing image data has margins.
Margins are configured in the application software
you are using.
BordlessOversize is set to Little in the Control
Panel menu.
590
Cause
For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the in-
cluded Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
For borderless printing at actual size, use roll paper that has the same width
as the actual page size.
(See "Borderless Printing at Actual Size.")
Check that the printing image data does not have any objects like crop marks
and transparent objects.
Check that no margins are configured in the application software you are us-
ing.
Set BordlessOversize to Standard in the Control Panel menu.
(See "Menu Settings.")
P.441
➔
Corrective Action
P.338
➔
P.65
➔
iPF6400SE
User's Guide