Canon imagePROGRAF iPF6400SE User Manual page 562

Preparing to Transfer the Printer
Important
3
Close all ink tank lock levers, and then close the Ink Tank
Cover.
At this point, ink is drawn out from inside the tubes.
Important
4
When the process is finished, "Completed! Turn Power Off!!" is
displayed.
Press the Power button and turn off the printer.
Pack the printer
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
1
Disconnect the power cord and interface cable.
Important
2
Open the Top Cover.
562
Store the ink tanks you removed with the ink holes (a) facing up.
•
Otherwise, ink may leak and cause stains.
Do not remove the Maintenance Cartridge unless a replacement message appears.
•
Removing the Maintenance Cartridge while the ink is bring drawn in may cause the ink to leak out.
• Unplug the power cord once the power is turned off. Unplugging the printer before it is off and moving it
may cause damage. If you accidentally unplug the printer before turning it off, plug it in again, reinstall
the ink tank, and perform the procedure again.
iPF6400SE
User's Guide