Canon imagePROGRAF iPF6400SE User Manual page 69

iPF6400SE
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at
the edges. If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed
Important
Settings dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once
printed and cut, please cut the upper and lower bands with scissors.
Document: Any type
•
Page size: 10 × 12 inches (254.0×304.8 mm)–Borderless
•
Paper: Roll
•
Paper type: Canon Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
•
1
Choose Page Setup from the application menu to display the Page Attributes dialog box.
The configuration method varies depending on the
•
OS and application software you are using.
Note
If Page Setup is displayed in the application menu,
the settings are configured by opening the Page At-
tributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the
upper part of the printer driver displayed when you se-
lect Print from the application software menu.
2
Select the printer in the
3
C
In the Paper Size list, choose a paper size supported for borderless printing. Here, click 10"x12" - Bor-
derless.
• Paper sizes supported for borderless printing are indicated by -Borderless.
Note
4
F
Click OK to close the dialog box.
5
In the application, create an original that takes up the entire space of the paper size.
6
Choose Print in the application menu.
User's Guide
B
Format for list.
Borderless Printing at Actual Size (Mac OS)
69