Cluster Management Module 4 (Cmm4) - Motorola PMP 320 Hardware Installation

Cluster Management Module 4 (CMM4)

Cluster Management Module 4 (CMM4)
■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■
The Cluster Management Module 4 (CMM4) provides power, synchronization, and network
connectivity for up to eight APs, backhauls, and Ethernet terrestrial feeds in a variety of
configurations.
Figure 1-4
The CMM4 provides:
•
Sync over Power over Ethernet and integrated surge suppression on the controller board
for up to 8 APs or BHs. Both a custom 30 VDC power scheme and a custom 56 VDC power
scheme are available. Neither is the same as the later IEEE Standard 802.3af, and neither
is compatible with it.
•
Managed switching using a hardened EtherWAN switch. The CMM4 ships with a 14-port
EtherWAN switch and is also available without a switch.
•
A weather-tight enclosure with either 4 or 7 glands/ports for Ethernet and power cables.
•
Surge suppression on the controller board for the incoming 30V DC and 56V DC power
lines and GPS coax cable.
PMP320HDW2v1
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
CMM4 with door open
Cabling Diagram on
Inside of Front Door
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
Preliminary
Chapter 1: Product Description
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■
■ ■ ■ ■
■
■
1-23
JUL 2010