Omron Programmable Terminals NT631 Setup Manual page 26

Functions of the NT631/NT631C
Item
Interlock function
Device monitor function
Recipe function
Accessible CS/CJ-series PLC
data areas
*1
This is the capacity of the flash memory that stores screen data.
*2
The values are the same as the NT30/NT30C when the PT is in NT30/620 compatible mode.
For differences in programming, refer to Appendix B in the NT31/NT31C/NT631/NT631C Programmable Termi-
nal Reference Manual.
NT620S/NT620C/NT625C
None
Not possible
None
---
NT631/NT631C
Operations can be disabled from the PLC by
allocating interlock bits to the corresponding
touch switch, numeral input, or character string
input.
Possible
Possible
The data areas listed below can be accessed in
addition to the data areas accessible with the
NT30/NT30C.
- EM banks (EM_0 to EM_C)
- Timer completion flags (TU)
- Counter completion flags (CU)
- Work areas (WR)
- Task flags (TK)
- HR area
Section 1-2
9