Omron Programmable Terminals NT631 Setup Manual page 184

Various System Settings
Reference:
• ON:
The buzzer sounds in response to instructions and when an error occurs.
• OFF:
The buzzer does not sound in response to instructions or when errors
occur.
• ERROR ON:
The buzzer sounds only when an error occurs.
The default (factory) setting is OFF.
• There are other instructions and settings relating to the buzzer, but this
memory switch setting has the highest priority.
• For details on the buzzer, refer to 2-15-5 Buzzer Function in the Refer-
ence Manual.
Set the buzzer sound by following the menu operation from the System Menu
shown below.
Ver 4.12
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
• To confirm the settings and quit the memory switch setting screen, press
the Quit touch switch. The settings made last will be set and the NT631/
NT631C will return to the MAINTENANCE MODE MENU screen.
• To quit the memory switch setting screen without confirming the settings,
press the Abort touch switch. The NT631/NT631C will return to the MAIN-
TENANCE MODE MENU screen with the previous settings still in effect.
Select Maintenance Mode.
Select Memory Switch.
Press Buzzer Sound to display ON,
OFF, or ERROR ON.
The setting option changes each
time the touch switch is pressed.
Section 6-9
167