Omron Programmable Terminals NT631 Setup Manual page 236

Programming Console Function
Differences with Respect
to Programming Consoles
Standard Programming Console Key Sheet
Programming Console Key Sheet for CS1 Series
• Programs cannot be stored (recorded) or read (replayed). If it is neces-
sary to store or read a program, use a Programming Device.
• It is not possible to adjust the volume of the key press sound. Whether or
not the key press sound sounds is determined by the setting for the Key
Press Sound memory switch of the NT631/NT631C. It sounds when the
setting is ON and does not when the setting is OFF (page 166).
• If an error occurs when using the Programming Console function, an error
screen is displayed. Whether or not the buzzer sounds at this time is
determined by the setting for the Buzzer Sound memory switch of the
NT631/NT631C (page 166).
Section 6-12
219