Related Manuals for Omron NT2S-SF122B-E
Summary of Contents for Omron NT2S-SF122B-E
- Page 1 While writing this document, it is assumed that the user is well acquainted with the PLC being used and with Windows based software usage, in general. Hereafter, in the manual, NT2S-SF122B-E will be referred to as NT2S B.
- Page 2 Based on conditions in the PLC the configured screens are displayed. When a key is pressed, configured action is taken. The unit continuously communicates with the PLC to detect conditions for displaying screens, to control the 2 LEDs on the unit and for its internal operations.
- Page 3 A normal screen can flash or scroll on the display. Any screen can be assigned to be sent to a serial printer. A screen can be assigned only to the top line, bottom line or both lines. A minimum time can be assigned to ensure that the operator has enough time to view the screen.
- Page 4 The keys on the NT2S B can perform user defined functions. The same keys can be used to change data or to scroll through a list of screens. The operation of keys depends on the type of screen being displayed as follows:...
- Page 5 When this special screen is triggered, the operator can enter the new data using the arrow keys and the CLR and ENT keys. Coils can also be edited this way. ow is the unit configured? Each unit MUST be configured using the Windows based setup software provided with the unit.
- Page 6 Depending on what type of tag ( bit or register ) is selected, only actions that can be performed on that tag will be enabled.
- Page 7 If chaining is used then the "chained to" screen must be defined. A list of screen texts called a link screen can be defined. It allows you to pick a list from the already defined screens and these screens can be viewed by pressing the NEXT or PREV keys.
- Page 8 The project can be downloaded to the NT2S A by selecting the Communicate-Download to Unit menu or by clicking the link between the PC and NT2S A on the toolstation. Connect the PC to the unit for downloading on the serial port. Use a simple straight through DB9 cable.