Initializing The Memory Switches - Omron Programmable Terminals NT631 Setup Manual

Memory Initialization
6-4-6

Initializing the Memory Switches

If No is selected, the NT631/NT631C returns to the MEMORY INIT. MENU
screen without initializing the memory tables.
On completion of memory table initialization, the message Finished is dis-
played and the NT631/NT631C returns to the MEMORY INIT. MENU screen.
Initialization returns all the memory switches of the NT631/NT631C to their
status on shipment.
Initialize the memory switches by following the menu operation from the Sys-
tem Menu shown below.
Ver 4.12
If No is selected, the NT631/NT631C returns to the MEMORY INIT. MENU
screen without initializing the memory switches.
On completion of memory switch initialization, the message Finished is dis-
played and the NT631/NT631C returns to the MEMORY INIT. MENU screen.
Select Maintenance Mode.
Select Memory Init..
Select Memory Switch.
Select Yes.
The memory tables are initialized.
During initialization, the message
Initializing is displayed.
Section 6-4
143