Omron Programmable Terminals NT631 Setup Manual page 189

Various System Settings
172
Set the screen saver operation by following the menu operation from the Sys-
tem Menu shown below.
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
• To confirm the settings and quit the memory switch setting screen, press
the Quit touch switch. The settings made last will be set and the NT631/
NT631C will return to the MAINTENANCE MODE MENU screen.
• To quit the memory switch setting screen without confirming the settings,
press the Abort touch switch. The NT631/NT631C will return to the MAIN-
TENANCE MODE MENU screen with the previous settings still in effect.
Ver 4.12
Select Maintenance Mode.
Select Memory Switch.
Press [↓] (next screen) or [↑] (previous
screen) to display the second memory
switch setting screen.
Press Screen Saver Movement to display
Display or Display erased.
The setting option changes each time the
touch switch is pressed.
Section 6-9